/*
 * Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009 Apple Inc. All rights reserved.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Library General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Library General Public License for more details.
 *
 * You should have received a copy of the GNU Library General Public License
 * along with this library; see the file COPYING.LIB.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 * Boston, MA 02110-1301, USA.
 */

#include "sky/engine/config.h"
#include "sky/engine/core/rendering/InlineFlowBox.h"

#include "gen/sky/core/CSSPropertyNames.h"
#include "sky/engine/core/dom/Document.h"
#include "sky/engine/core/rendering/HitTestResult.h"
#include "sky/engine/core/rendering/InlineTextBox.h"
#include "sky/engine/core/rendering/RenderBlock.h"
#include "sky/engine/core/rendering/RenderInline.h"
#include "sky/engine/core/rendering/RenderLayer.h"
#include "sky/engine/core/rendering/RenderObjectInlines.h"
#include "sky/engine/core/rendering/RenderParagraph.h"
#include "sky/engine/core/rendering/RenderView.h"
#include "sky/engine/core/rendering/RootInlineBox.h"
#include "sky/engine/platform/fonts/Font.h"
#include "sky/engine/platform/graphics/GraphicsContextStateSaver.h"

#include <math.h>

namespace blink {

struct SameSizeAsInlineFlowBox : public InlineBox {
    void* pointers[5];
    uint32_t bitfields : 23;
};

COMPILE_ASSERT(sizeof(InlineFlowBox) == sizeof(SameSizeAsInlineFlowBox), InlineFlowBox_should_stay_small);

#if ENABLE(ASSERT)

InlineFlowBox::~InlineFlowBox()
{
    if (!m_hasBadChildList)
        for (InlineBox* child = firstChild(); child; child = child->nextOnLine())
            child->setHasBadParent();
}

#endif

LayoutUnit InlineFlowBox::getFlowSpacingLogicalWidth()
{
    LayoutUnit totWidth = marginBorderPaddingLogicalLeft() + marginBorderPaddingLogicalRight();
    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->isInlineFlowBox())
            totWidth += toInlineFlowBox(curr)->getFlowSpacingLogicalWidth();
    }
    return totWidth;
}

IntRect InlineFlowBox::roundedFrameRect() const
{
    // Begin by snapping the x and y coordinates to the nearest pixel.
    int snappedX = lroundf(x());
    int snappedY = lroundf(y());

    int snappedMaxX = lroundf(x() + width());
    int snappedMaxY = lroundf(y() + height());

    return IntRect(snappedX, snappedY, snappedMaxX - snappedX, snappedMaxY - snappedY);
}

static void setHasTextDescendantsOnAncestors(InlineFlowBox* box)
{
    while (box && !box->hasTextDescendants()) {
        box->setHasTextDescendants();
        box = box->parent();
    }
}

static bool hasSelfPaintingLayer(InlineBox* box)
{
    RenderObject& renderer = box->renderer();
    if (renderer.isBox())
        return toRenderBox(renderer).hasSelfPaintingLayer();
    return false;
}

void InlineFlowBox::addToLine(InlineBox* child)
{
    ASSERT(!child->parent());
    ASSERT(!child->nextOnLine());
    ASSERT(!child->prevOnLine());
    checkConsistency();

    child->setParent(this);
    if (!m_firstChild) {
        m_firstChild = child;
        m_lastChild = child;
    } else {
        m_lastChild->setNextOnLine(child);
        child->setPrevOnLine(m_lastChild);
        m_lastChild = child;
    }
    child->setFirstLineStyleBit(isFirstLineStyle());
    if (child->isText()) {
        if (child->renderer().parent() == renderer())
            m_hasTextChildren = true;
        setHasTextDescendantsOnAncestors(this);
    } else if (child->isInlineFlowBox()) {
        if (toInlineFlowBox(child)->hasTextDescendants())
            setHasTextDescendantsOnAncestors(this);
    }

    if (descendantsHaveSameLineHeightAndBaseline() && !child->renderer().isOutOfFlowPositioned()) {
        RenderStyle* parentStyle = renderer().style(isFirstLineStyle());
        RenderStyle* childStyle = child->renderer().style(isFirstLineStyle());
        bool shouldClearDescendantsHaveSameLineHeightAndBaseline = false;
        if (child->renderer().isReplaced())
            shouldClearDescendantsHaveSameLineHeightAndBaseline = true;
        else if (child->isText()) {
            if (child->renderer().parent() != renderer()) {
                if (!parentStyle->font().fontMetrics().hasIdenticalAscentDescentAndLineGap(childStyle->font().fontMetrics())
                    || parentStyle->lineHeight() != childStyle->lineHeight()
                    || (parentStyle->verticalAlign() != BASELINE && !isRootInlineBox()) || childStyle->verticalAlign() != BASELINE)
                    shouldClearDescendantsHaveSameLineHeightAndBaseline = true;
            }
            if (childStyle->textEmphasisMark() != TextEmphasisMarkNone)
                shouldClearDescendantsHaveSameLineHeightAndBaseline = true;
        } else {
            ASSERT(isInlineFlowBox());
            InlineFlowBox* childFlowBox = toInlineFlowBox(child);
            // Check the child's bit, and then also check for differences in font, line-height, vertical-align
            if (!childFlowBox->descendantsHaveSameLineHeightAndBaseline()
                || !parentStyle->font().fontMetrics().hasIdenticalAscentDescentAndLineGap(childStyle->font().fontMetrics())
                || parentStyle->lineHeight() != childStyle->lineHeight()
                || (parentStyle->verticalAlign() != BASELINE && !isRootInlineBox()) || childStyle->verticalAlign() != BASELINE
                || childStyle->hasBorder() || childStyle->hasPadding())
                shouldClearDescendantsHaveSameLineHeightAndBaseline = true;
        }

        if (shouldClearDescendantsHaveSameLineHeightAndBaseline)
            clearDescendantsHaveSameLineHeightAndBaseline();
    }

    if (!child->renderer().isOutOfFlowPositioned()) {
        if (child->isText()) {
            RenderStyle* childStyle = child->renderer().style(isFirstLineStyle());
            if (childStyle->letterSpacing() < 0 || childStyle->textShadow() || childStyle->textEmphasisMark() != TextEmphasisMarkNone || childStyle->textStrokeWidth())
                child->clearKnownToHaveNoOverflow();
        } else if (child->renderer().isReplaced()) {
            RenderBox& box = toRenderBox(child->renderer());
            if (box.hasRenderOverflow() || box.hasSelfPaintingLayer())
                child->clearKnownToHaveNoOverflow();
        } else if (child->renderer().style(isFirstLineStyle())->boxShadow() || hasSelfPaintingLayer(child)
            || child->renderer().style(isFirstLineStyle())->hasBorderImageOutsets()
            || child->renderer().style(isFirstLineStyle())->hasOutline()) {
            child->clearKnownToHaveNoOverflow();
        }

        if (knownToHaveNoOverflow() && child->isInlineFlowBox() && !toInlineFlowBox(child)->knownToHaveNoOverflow())
            clearKnownToHaveNoOverflow();
    }

    checkConsistency();
}

void InlineFlowBox::removeChild(InlineBox* child, MarkLineBoxes markDirty)
{
    checkConsistency();

    if (markDirty == MarkLineBoxesDirty && !isDirty())
        dirtyLineBoxes();

    root().childRemoved(child);

    if (child == m_firstChild)
        m_firstChild = child->nextOnLine();
    if (child == m_lastChild)
        m_lastChild = child->prevOnLine();
    if (child->nextOnLine())
        child->nextOnLine()->setPrevOnLine(child->prevOnLine());
    if (child->prevOnLine())
        child->prevOnLine()->setNextOnLine(child->nextOnLine());

    child->setParent(0);

    checkConsistency();
}

void InlineFlowBox::deleteLine()
{
    InlineBox* child = firstChild();
    InlineBox* next = 0;
    while (child) {
        ASSERT(this == child->parent());
        next = child->nextOnLine();
#if ENABLE(ASSERT)
        child->setParent(0);
#endif
        child->deleteLine();
        child = next;
    }
#if ENABLE(ASSERT)
    m_firstChild = 0;
    m_lastChild = 0;
#endif

    removeLineBoxFromRenderObject();
    destroy();
}

void InlineFlowBox::removeLineBoxFromRenderObject()
{
    rendererLineBoxes()->removeLineBox(this);
}

void InlineFlowBox::extractLine()
{
    if (!extracted())
        extractLineBoxFromRenderObject();
    for (InlineBox* child = firstChild(); child; child = child->nextOnLine())
        child->extractLine();
}

void InlineFlowBox::extractLineBoxFromRenderObject()
{
    rendererLineBoxes()->extractLineBox(this);
}

void InlineFlowBox::attachLine()
{
    if (extracted())
        attachLineBoxToRenderObject();
    for (InlineBox* child = firstChild(); child; child = child->nextOnLine())
        child->attachLine();
}

void InlineFlowBox::attachLineBoxToRenderObject()
{
    rendererLineBoxes()->attachLineBox(this);
}

void InlineFlowBox::adjustPosition(float dx, float dy)
{
    InlineBox::adjustPosition(dx, dy);
    for (InlineBox* child = firstChild(); child; child = child->nextOnLine())
        child->adjustPosition(dx, dy);
    if (m_overflow)
        m_overflow->move(dx, dy); // FIXME: Rounding error here since overflow was pixel snapped, but nobody other than list markers passes non-integral values here.
}

RenderLineBoxList* InlineFlowBox::rendererLineBoxes() const
{
    return toRenderInline(renderer()).lineBoxes();
}

static inline bool isLastChildForRenderer(RenderObject* ancestor, RenderObject* child)
{
    if (!child)
        return false;

    if (child == ancestor)
        return true;

    RenderObject* curr = child;
    RenderObject* parent = curr->parent();
    while (parent && (!parent->isRenderBlock() || parent->isInline())) {
        if (parent->slowLastChild() != curr)
            return false;
        if (parent == ancestor)
            return true;

        curr = parent;
        parent = curr->parent();
    }

    return true;
}

static bool isAnsectorAndWithinBlock(RenderObject* ancestor, RenderObject* child)
{
    RenderObject* object = child;
    while (object && (!object->isRenderBlock() || object->isInline())) {
        if (object == ancestor)
            return true;
        object = object->parent();
    }
    return false;
}

void InlineFlowBox::determineSpacingForFlowBoxes(bool lastLine, bool isLogicallyLastRunWrapped, RenderObject* logicallyLastRunRenderer)
{
    // All boxes start off open.  They will not apply any margins/border/padding on
    // any side.
    bool includeLeftEdge = false;
    bool includeRightEdge = false;

    // The root inline box never has borders/margins/padding.
    if (parent()) {
        bool ltr = renderer().style()->isLeftToRightDirection();

        // Check to see if all initial lines are unconstructed.  If so, then
        // we know the inline began on this line.
        RenderLineBoxList* lineBoxList = rendererLineBoxes();
        if (!lineBoxList->firstLineBox()->isConstructed()) {
            if (renderer().style()->boxDecorationBreak() == DCLONE)
                includeLeftEdge = includeRightEdge = true;
            else if (ltr && lineBoxList->firstLineBox() == this)
                includeLeftEdge = true;
            else if (!ltr && lineBoxList->lastLineBox() == this)
                includeRightEdge = true;
        }

        if (!lineBoxList->lastLineBox()->isConstructed()) {
            bool isLastObjectOnLine = !isAnsectorAndWithinBlock(&renderer(), logicallyLastRunRenderer) || (isLastChildForRenderer(&renderer(), logicallyLastRunRenderer) && !isLogicallyLastRunWrapped);

            // We include the border under these conditions:
            // (1) The next line was not created, or it is constructed. We check the previous line for rtl.
            // (2) The logicallyLastRun is not a descendant of this renderer.
            // (3) The logicallyLastRun is a descendant of this renderer, but it is the last child of this renderer and it does not wrap to the next line.
            // (4) The decoration break is set to clone therefore there will be borders on every sides.
            if (renderer().style()->boxDecorationBreak() == DCLONE)
                includeLeftEdge = includeRightEdge = true;
            else if (ltr) {
                if (!nextLineBox()
                    && (lastLine || isLastObjectOnLine))
                    includeRightEdge = true;
            } else {
                if ((!prevLineBox() || prevLineBox()->isConstructed())
                    && (lastLine || isLastObjectOnLine))
                    includeLeftEdge = true;
            }
        }
    }

    setEdges(includeLeftEdge, includeRightEdge);

    // Recur into our children.
    for (InlineBox* currChild = firstChild(); currChild; currChild = currChild->nextOnLine()) {
        if (currChild->isInlineFlowBox()) {
            InlineFlowBox* currFlow = toInlineFlowBox(currChild);
            currFlow->determineSpacingForFlowBoxes(lastLine, isLogicallyLastRunWrapped, logicallyLastRunRenderer);
        }
    }
}

float InlineFlowBox::placeBoxesInInlineDirection(float logicalLeft, bool& needsWordSpacing)
{
    // Set our x position.
    beginPlacingBoxRangesInInlineDirection(logicalLeft);

    float startLogicalLeft = logicalLeft;
    logicalLeft += borderLogicalLeft() + paddingLogicalLeft();

    float minLogicalLeft = startLogicalLeft;
    float maxLogicalRight = logicalLeft;

    placeBoxRangeInInlineDirection(firstChild(), 0, logicalLeft, minLogicalLeft, maxLogicalRight, needsWordSpacing);

    logicalLeft += borderLogicalRight() + paddingLogicalRight();
    endPlacingBoxRangesInInlineDirection(startLogicalLeft, logicalLeft, minLogicalLeft, maxLogicalRight);
    return logicalLeft;
}

float InlineFlowBox::placeBoxRangeInInlineDirection(InlineBox* firstChild, InlineBox* lastChild,
    float& logicalLeft, float& minLogicalLeft, float& maxLogicalRight, bool& needsWordSpacing)
{
    for (InlineBox* curr = firstChild; curr && curr != lastChild; curr = curr->nextOnLine()) {
        if (curr->renderer().isText()) {
            InlineTextBox* text = toInlineTextBox(curr);
            RenderText& rt = text->renderer();
            if (rt.textLength()) {
                if (needsWordSpacing && isSpaceOrNewline(rt.characterAt(text->start())))
                    logicalLeft += rt.style(isFirstLineStyle())->font().fontDescription().wordSpacing();
                needsWordSpacing = !isSpaceOrNewline(rt.characterAt(text->end()));
            }
            text->setLogicalLeft(logicalLeft);
            if (knownToHaveNoOverflow())
                minLogicalLeft = std::min(logicalLeft, minLogicalLeft);
            logicalLeft += text->logicalWidth();
            if (knownToHaveNoOverflow())
                maxLogicalRight = std::max(logicalLeft, maxLogicalRight);
        } else {
            if (curr->renderer().isOutOfFlowPositioned()) {
                if (curr->renderer().parent()->style()->isLeftToRightDirection()) {
                    curr->setLogicalLeft(logicalLeft);
                } else {
                    // Our offset that we cache needs to be from the edge of the right border box and
                    // not the left border box.  We have to subtract |x| from the width of the block
                    // (which can be obtained from the root line box).
                    curr->setLogicalLeft(root().block().logicalWidth() - logicalLeft);
                }
                continue; // The positioned object has no effect on the width.
            }
            if (curr->renderer().isRenderInline()) {
                InlineFlowBox* flow = toInlineFlowBox(curr);
                logicalLeft += flow->marginLogicalLeft();
                if (knownToHaveNoOverflow())
                    minLogicalLeft = std::min(logicalLeft, minLogicalLeft);
                logicalLeft = flow->placeBoxesInInlineDirection(logicalLeft, needsWordSpacing);
                if (knownToHaveNoOverflow())
                    maxLogicalRight = std::max(logicalLeft, maxLogicalRight);
                logicalLeft += flow->marginLogicalRight();
            } else {
                // The box can have a different writing-mode than the overall line, so this is a bit complicated.
                // Just get all the physical margin and overflow values by hand based off |isVertical|.
                LayoutUnit logicalLeftMargin = curr->boxModelObject()->marginLeft();
                LayoutUnit logicalRightMargin = curr->boxModelObject()->marginRight();

                logicalLeft += logicalLeftMargin;
                curr->setLogicalLeft(logicalLeft);
                if (knownToHaveNoOverflow())
                    minLogicalLeft = std::min(logicalLeft, minLogicalLeft);
                logicalLeft += curr->logicalWidth();
                if (knownToHaveNoOverflow())
                    maxLogicalRight = std::max(logicalLeft, maxLogicalRight);
                logicalLeft += logicalRightMargin;
                // If we encounter any space after this inline block then ensure it is treated as the space between two words.
                needsWordSpacing = true;
            }
        }
    }
    return logicalLeft;
}

void InlineFlowBox::adjustMaxAscentAndDescent(int& maxAscent, int& maxDescent, int maxPositionTop, int maxPositionBottom)
{
    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        // The computed lineheight needs to be extended for the
        // positioned elements
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.
        if (curr->verticalAlign() == TOP || curr->verticalAlign() == BOTTOM) {
            int lineHeight = curr->lineHeight();
            if (curr->verticalAlign() == TOP) {
                if (maxAscent + maxDescent < lineHeight)
                    maxDescent = lineHeight - maxAscent;
            }
            else {
                if (maxAscent + maxDescent < lineHeight)
                    maxAscent = lineHeight - maxDescent;
            }

            if (maxAscent + maxDescent >= std::max(maxPositionTop, maxPositionBottom))
                break;
        }

        if (curr->isInlineFlowBox())
            toInlineFlowBox(curr)->adjustMaxAscentAndDescent(maxAscent, maxDescent, maxPositionTop, maxPositionBottom);
    }
}

void InlineFlowBox::computeLogicalBoxHeights(RootInlineBox* rootBox, LayoutUnit& maxPositionTop, LayoutUnit& maxPositionBottom,
                                             int& maxAscent, int& maxDescent, bool& setMaxAscent, bool& setMaxDescent,
                                             bool strictMode, GlyphOverflowAndFallbackFontsMap& textBoxDataMap,
                                             FontBaseline baselineType, VerticalPositionCache& verticalPositionCache)
{
    // The primary purpose of this function is to compute the maximal ascent and descent values for
    // a line. These values are computed based off the block's line-box-contain property, which indicates
    // what parts of descendant boxes have to fit within the line.
    //
    // The maxAscent value represents the distance of the highest point of any box (typically including line-height) from
    // the root box's baseline. The maxDescent value represents the distance of the lowest point of any box
    // (also typically including line-height) from the root box baseline. These values can be negative.
    //
    // A secondary purpose of this function is to store the offset of every box's baseline from the root box's
    // baseline. This information is cached in the logicalTop() of every box. We're effectively just using
    // the logicalTop() as scratch space.
    //
    // Because a box can be positioned such that it ends up fully above or fully below the
    // root line box, we only consider it to affect the maxAscent and maxDescent values if some
    // part of the box (EXCLUDING leading) is above (for ascent) or below (for descent) the root box's baseline.
    bool affectsAscent = false;
    bool affectsDescent = false;
    bool checkChildren = !descendantsHaveSameLineHeightAndBaseline();

    if (isRootInlineBox()) {
        // Examine our root box.
        int ascent = 0;
        int descent = 0;
        rootBox->ascentAndDescentForBox(rootBox, textBoxDataMap, ascent, descent, affectsAscent, affectsDescent);
        if (strictMode || hasTextChildren() || (!checkChildren && hasTextDescendants())) {
            if (maxAscent < ascent || !setMaxAscent) {
                maxAscent = ascent;
                setMaxAscent = true;
            }
            if (maxDescent < descent || !setMaxDescent) {
                maxDescent = descent;
                setMaxDescent = true;
            }
        }
    }

    if (!checkChildren)
        return;

    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.

        InlineFlowBox* inlineFlowBox = curr->isInlineFlowBox() ? toInlineFlowBox(curr) : 0;

        bool affectsAscent = false;
        bool affectsDescent = false;

        // The verticalPositionForBox function returns the distance between the child box's baseline
        // and the root box's baseline.  The value is negative if the child box's baseline is above the
        // root box's baseline, and it is positive if the child box's baseline is below the root box's baseline.
        curr->setLogicalTop(rootBox->verticalPositionForBox(curr, verticalPositionCache).toFloat());

        int ascent = 0;
        int descent = 0;
        rootBox->ascentAndDescentForBox(curr, textBoxDataMap, ascent, descent, affectsAscent, affectsDescent);

        LayoutUnit boxHeight = ascent + descent;
        if (curr->verticalAlign() == TOP) {
            if (maxPositionTop < boxHeight)
                maxPositionTop = boxHeight;
        } else if (curr->verticalAlign() == BOTTOM) {
            if (maxPositionBottom < boxHeight)
                maxPositionBottom = boxHeight;
        } else if (!inlineFlowBox || strictMode || inlineFlowBox->hasTextChildren() || (inlineFlowBox->descendantsHaveSameLineHeightAndBaseline() && inlineFlowBox->hasTextDescendants())
                   || inlineFlowBox->boxModelObject()->hasInlineDirectionBordersOrPadding()) {
            // Note that these values can be negative.  Even though we only affect the maxAscent and maxDescent values
            // if our box (excluding line-height) was above (for ascent) or below (for descent) the root baseline, once you factor in line-height
            // the final box can end up being fully above or fully below the root box's baseline!  This is ok, but what it
            // means is that ascent and descent (including leading), can end up being negative.  The setMaxAscent and
            // setMaxDescent booleans are used to ensure that we're willing to initially set maxAscent/Descent to negative
            // values.
            ascent -= curr->logicalTop();
            descent += curr->logicalTop();
            if (affectsAscent && (maxAscent < ascent || !setMaxAscent)) {
                maxAscent = ascent;
                setMaxAscent = true;
            }

            if (affectsDescent && (maxDescent < descent || !setMaxDescent)) {
                maxDescent = descent;
                setMaxDescent = true;
            }
        }

        if (inlineFlowBox)
            inlineFlowBox->computeLogicalBoxHeights(rootBox, maxPositionTop, maxPositionBottom, maxAscent, maxDescent,
                                                    setMaxAscent, setMaxDescent, strictMode, textBoxDataMap,
                                                    baselineType, verticalPositionCache);
    }
}

void InlineFlowBox::placeBoxesInBlockDirection(LayoutUnit top, LayoutUnit maxHeight, int maxAscent, bool strictMode, LayoutUnit& lineTop, LayoutUnit& lineBottom, LayoutUnit& selectionBottom, bool& setLineTop,
                                               LayoutUnit& lineTopIncludingMargins, LayoutUnit& lineBottomIncludingMargins, bool& hasAnnotationsBefore, bool& hasAnnotationsAfter, FontBaseline baselineType)
{
    bool isRootBox = isRootInlineBox();
    if (isRootBox) {
        const FontMetrics& fontMetrics = renderer().style(isFirstLineStyle())->fontMetrics();
        // RootInlineBoxes are always placed on at pixel boundaries in their logical y direction. Not doing
        // so results in incorrect rendering of text decorations, most notably underlines.
        setLogicalTop(roundToInt(top + maxAscent - fontMetrics.ascent(baselineType)));
    }

    LayoutUnit adjustmentForChildrenWithSameLineHeightAndBaseline = 0;
    if (descendantsHaveSameLineHeightAndBaseline()) {
        adjustmentForChildrenWithSameLineHeightAndBaseline = logicalTop();
        if (parent())
            adjustmentForChildrenWithSameLineHeightAndBaseline += (boxModelObject()->borderBefore() + boxModelObject()->paddingBefore());
    }

    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.

        if (descendantsHaveSameLineHeightAndBaseline()) {
            curr->adjustBlockDirectionPosition(adjustmentForChildrenWithSameLineHeightAndBaseline.toFloat());
            continue;
        }

        InlineFlowBox* inlineFlowBox = curr->isInlineFlowBox() ? toInlineFlowBox(curr) : 0;
        bool childAffectsTopBottomPos = true;
        if (curr->verticalAlign() == TOP)
            curr->setLogicalTop(top.toFloat());
        else if (curr->verticalAlign() == BOTTOM)
            curr->setLogicalTop((top + maxHeight - curr->lineHeight()).toFloat());
        else {
            if (!strictMode && inlineFlowBox && !inlineFlowBox->hasTextChildren() && !curr->boxModelObject()->hasInlineDirectionBordersOrPadding()
                && !(inlineFlowBox->descendantsHaveSameLineHeightAndBaseline() && inlineFlowBox->hasTextDescendants()))
                childAffectsTopBottomPos = false;
            LayoutUnit posAdjust = maxAscent - curr->baselinePosition(baselineType);
            curr->setLogicalTop(curr->logicalTop() + top + posAdjust);
        }

        LayoutUnit newLogicalTop = curr->logicalTop();
        LayoutUnit newLogicalTopIncludingMargins = newLogicalTop;
        LayoutUnit boxHeight = curr->logicalHeight();
        LayoutUnit boxHeightIncludingMargins = boxHeight;
        LayoutUnit borderPaddingHeight = 0;
        if (curr->isText() || curr->isInlineFlowBox()) {
            const FontMetrics& fontMetrics = curr->renderer().style(isFirstLineStyle())->fontMetrics();
            newLogicalTop += curr->baselinePosition(baselineType) - fontMetrics.ascent(baselineType);
            if (curr->isInlineFlowBox()) {
                RenderBoxModelObject& boxObject = toRenderBoxModelObject(curr->renderer());
                newLogicalTop -= boxObject.borderTop() + boxObject.paddingTop();
                borderPaddingHeight = boxObject.borderAndPaddingLogicalHeight();
            }
            newLogicalTopIncludingMargins = newLogicalTop;
        } else {
            RenderBox& box = toRenderBox(curr->renderer());
            newLogicalTopIncludingMargins = newLogicalTop;
            LayoutUnit overSideMargin = box.marginTop();
            LayoutUnit underSideMargin = box.marginBottom();
            newLogicalTop += overSideMargin;
            boxHeightIncludingMargins += overSideMargin + underSideMargin;
        }

        curr->setLogicalTop(newLogicalTop.toFloat());

        if (childAffectsTopBottomPos) {
            if (curr->isInlineTextBox()) {
                TextEmphasisPosition emphasisMarkPosition;
                if (toInlineTextBox(curr)->getEmphasisMarkPosition(curr->renderer().style(isFirstLineStyle()), emphasisMarkPosition)) {
                    bool emphasisMarkIsOver = emphasisMarkPosition == TextEmphasisPositionOver;
                    if (emphasisMarkIsOver)
                        hasAnnotationsBefore = true;
                    else
                        hasAnnotationsAfter = true;
                }
            }

            if (!setLineTop) {
                setLineTop = true;
                lineTop = newLogicalTop;
                lineTopIncludingMargins = std::min(lineTop, newLogicalTopIncludingMargins);
            } else {
                lineTop = std::min(lineTop, newLogicalTop);
                lineTopIncludingMargins = std::min(lineTop, std::min(lineTopIncludingMargins, newLogicalTopIncludingMargins));
            }
            selectionBottom = std::max(selectionBottom, newLogicalTop + boxHeight - borderPaddingHeight);
            lineBottom = std::max(lineBottom, newLogicalTop + boxHeight);
            lineBottomIncludingMargins = std::max(lineBottom, std::max(lineBottomIncludingMargins, newLogicalTopIncludingMargins + boxHeightIncludingMargins));
        }

        // Adjust boxes to use their real box y/height and not the logical height (as dictated by
        // line-height).
        if (inlineFlowBox)
            inlineFlowBox->placeBoxesInBlockDirection(top, maxHeight, maxAscent, strictMode, lineTop, lineBottom, selectionBottom, setLineTop,
                                                      lineTopIncludingMargins, lineBottomIncludingMargins, hasAnnotationsBefore, hasAnnotationsAfter, baselineType);
    }

    if (isRootBox) {
        if (strictMode || hasTextChildren() || (descendantsHaveSameLineHeightAndBaseline() && hasTextDescendants())) {
            if (!setLineTop) {
                setLineTop = true;
                lineTop = pixelSnappedLogicalTop();
                lineTopIncludingMargins = lineTop;
            } else {
                lineTop = std::min<LayoutUnit>(lineTop, pixelSnappedLogicalTop());
                lineTopIncludingMargins = std::min(lineTop, lineTopIncludingMargins);
            }
            selectionBottom = std::max<LayoutUnit>(selectionBottom, pixelSnappedLogicalBottom());
            lineBottom = std::max<LayoutUnit>(lineBottom, pixelSnappedLogicalBottom());
            lineBottomIncludingMargins = std::max(lineBottom, lineBottomIncludingMargins);
        }
    }
}

void InlineFlowBox::computeMaxLogicalTop(float& maxLogicalTop) const
{
    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.

        if (descendantsHaveSameLineHeightAndBaseline())
            continue;

        maxLogicalTop = std::max<float>(maxLogicalTop, curr->y());
        float localMaxLogicalTop = 0;
        if (curr->isInlineFlowBox())
            toInlineFlowBox(curr)->computeMaxLogicalTop(localMaxLogicalTop);
        maxLogicalTop = std::max<float>(maxLogicalTop, localMaxLogicalTop);
    }
}

void InlineFlowBox::flipLinesInBlockDirection(LayoutUnit lineTop, LayoutUnit lineBottom)
{
    // Flip the box on the line such that the top is now relative to the lineBottom instead of the lineTop.
    setLogicalTop(lineBottom - (logicalTop() - lineTop) - logicalHeight());

    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders aren't affected here.

        if (curr->isInlineFlowBox())
            toInlineFlowBox(curr)->flipLinesInBlockDirection(lineTop, lineBottom);
        else
            curr->setLogicalTop(lineBottom - (curr->logicalTop() - lineTop) - curr->logicalHeight());
    }
}

inline void InlineFlowBox::addBoxShadowVisualOverflow(LayoutRect& logicalVisualOverflow)
{
    // box-shadow on root line boxes is applying to the block and not to the lines.
    if (!parent())
        return;

    RenderStyle* style = renderer().style(isFirstLineStyle());
    if (!style->boxShadow())
        return;

    LayoutUnit boxShadowLogicalTop;
    LayoutUnit boxShadowLogicalBottom;
    style->getBoxShadowBlockDirectionExtent(boxShadowLogicalTop, boxShadowLogicalBottom);

    // Similar to how glyph overflow works, if our lines are flipped, then it's actually the opposite shadow that applies, since
    // the line is "upside down" in terms of block coordinates.
    LayoutUnit shadowLogicalTop = boxShadowLogicalTop;
    LayoutUnit shadowLogicalBottom = boxShadowLogicalBottom;

    LayoutUnit logicalTopVisualOverflow = std::min(pixelSnappedLogicalTop() + shadowLogicalTop, logicalVisualOverflow.y());
    LayoutUnit logicalBottomVisualOverflow = std::max(pixelSnappedLogicalBottom() + shadowLogicalBottom, logicalVisualOverflow.maxY());

    LayoutUnit boxShadowLogicalLeft;
    LayoutUnit boxShadowLogicalRight;
    style->getBoxShadowInlineDirectionExtent(boxShadowLogicalLeft, boxShadowLogicalRight);

    LayoutUnit logicalLeftVisualOverflow = std::min(pixelSnappedLogicalLeft() + boxShadowLogicalLeft, logicalVisualOverflow.x());
    LayoutUnit logicalRightVisualOverflow = std::max(pixelSnappedLogicalRight() + boxShadowLogicalRight, logicalVisualOverflow.maxX());

    logicalVisualOverflow = LayoutRect(logicalLeftVisualOverflow, logicalTopVisualOverflow,
                                       logicalRightVisualOverflow - logicalLeftVisualOverflow, logicalBottomVisualOverflow - logicalTopVisualOverflow);
}

inline void InlineFlowBox::addBorderOutsetVisualOverflow(LayoutRect& logicalVisualOverflow)
{
    // border-image-outset on root line boxes is applying to the block and not to the lines.
    if (!parent())
        return;

    RenderStyle* style = renderer().style(isFirstLineStyle());
    if (!style->hasBorderImageOutsets())
        return;

    LayoutBoxExtent borderOutsets = style->borderImageOutsets();

    LayoutUnit borderOutsetLogicalTop = borderOutsets.logicalTop();
    LayoutUnit borderOutsetLogicalBottom = borderOutsets.logicalBottom();
    LayoutUnit borderOutsetLogicalLeft = borderOutsets.logicalLeft();
    LayoutUnit borderOutsetLogicalRight = borderOutsets.logicalRight();

    // Similar to how glyph overflow works, if our lines are flipped, then it's actually the opposite border that applies, since
    // the line is "upside down" in terms of block coordinates. vertical-rl and horizontal-bt are the flipped line modes.
    LayoutUnit outsetLogicalTop = borderOutsetLogicalTop;
    LayoutUnit outsetLogicalBottom = borderOutsetLogicalBottom;

    LayoutUnit logicalTopVisualOverflow = std::min(pixelSnappedLogicalTop() - outsetLogicalTop, logicalVisualOverflow.y());
    LayoutUnit logicalBottomVisualOverflow = std::max(pixelSnappedLogicalBottom() + outsetLogicalBottom, logicalVisualOverflow.maxY());

    LayoutUnit outsetLogicalLeft = includeLogicalLeftEdge() ? borderOutsetLogicalLeft : LayoutUnit();
    LayoutUnit outsetLogicalRight = includeLogicalRightEdge() ? borderOutsetLogicalRight : LayoutUnit();

    LayoutUnit logicalLeftVisualOverflow = std::min(pixelSnappedLogicalLeft() - outsetLogicalLeft, logicalVisualOverflow.x());
    LayoutUnit logicalRightVisualOverflow = std::max(pixelSnappedLogicalRight() + outsetLogicalRight, logicalVisualOverflow.maxX());

    logicalVisualOverflow = LayoutRect(logicalLeftVisualOverflow, logicalTopVisualOverflow,
                                       logicalRightVisualOverflow - logicalLeftVisualOverflow, logicalBottomVisualOverflow - logicalTopVisualOverflow);
}

inline void InlineFlowBox::addOutlineVisualOverflow(LayoutRect& logicalVisualOverflow)
{
    // Outline on root line boxes is applied to the block and not to the lines.
    if (!parent())
        return;

    RenderStyle* style = renderer().style(isFirstLineStyle());
    if (!style->hasOutline())
        return;

    logicalVisualOverflow.inflate(style->outlineSize());
}

inline void InlineFlowBox::addTextBoxVisualOverflow(InlineTextBox* textBox, GlyphOverflowAndFallbackFontsMap& textBoxDataMap, LayoutRect& logicalVisualOverflow)
{
    if (textBox->knownToHaveNoOverflow())
        return;

    RenderStyle* style = textBox->renderer().style(isFirstLineStyle());

    GlyphOverflowAndFallbackFontsMap::iterator it = textBoxDataMap.find(textBox);
    GlyphOverflow* glyphOverflow = it == textBoxDataMap.end() ? 0 : &it->value.second;

    int topGlyphEdge = glyphOverflow ? glyphOverflow->top : 0;
    int bottomGlyphEdge = glyphOverflow ? glyphOverflow->bottom : 0;
    int leftGlyphEdge = glyphOverflow ? glyphOverflow->left : 0;
    int rightGlyphEdge = glyphOverflow ? glyphOverflow->right : 0;

    int strokeOverflow = static_cast<int>(ceilf(style->textStrokeWidth() / 2.0f));
    int topGlyphOverflow = -strokeOverflow - topGlyphEdge;
    int bottomGlyphOverflow = strokeOverflow + bottomGlyphEdge;
    int leftGlyphOverflow = -strokeOverflow - leftGlyphEdge;
    int rightGlyphOverflow = strokeOverflow + rightGlyphEdge;

    TextEmphasisPosition emphasisMarkPosition;
    if (style->textEmphasisMark() != TextEmphasisMarkNone && textBox->getEmphasisMarkPosition(style, emphasisMarkPosition)) {
        int emphasisMarkHeight = style->font().emphasisMarkHeight(style->textEmphasisMarkString());
        if (emphasisMarkPosition == TextEmphasisPositionOver)
            topGlyphOverflow = std::min(topGlyphOverflow, -emphasisMarkHeight);
        else
            bottomGlyphOverflow = std::max(bottomGlyphOverflow, emphasisMarkHeight);
    }

    // If letter-spacing is negative, we should factor that into right layout overflow. (Even in RTL, letter-spacing is
    // applied to the right, so this is not an issue with left overflow.
    rightGlyphOverflow -= std::min(0, (int)style->font().fontDescription().letterSpacing());

    LayoutUnit textShadowLogicalTop;
    LayoutUnit textShadowLogicalBottom;
    style->getTextShadowBlockDirectionExtent(textShadowLogicalTop, textShadowLogicalBottom);

    LayoutUnit childOverflowLogicalTop = std::min<LayoutUnit>(textShadowLogicalTop + topGlyphOverflow, topGlyphOverflow);
    LayoutUnit childOverflowLogicalBottom = std::max<LayoutUnit>(textShadowLogicalBottom + bottomGlyphOverflow, bottomGlyphOverflow);

    LayoutUnit textShadowLogicalLeft;
    LayoutUnit textShadowLogicalRight;
    style->getTextShadowInlineDirectionExtent(textShadowLogicalLeft, textShadowLogicalRight);

    LayoutUnit childOverflowLogicalLeft = std::min<LayoutUnit>(textShadowLogicalLeft + leftGlyphOverflow, leftGlyphOverflow);
    LayoutUnit childOverflowLogicalRight = std::max<LayoutUnit>(textShadowLogicalRight + rightGlyphOverflow, rightGlyphOverflow);

    LayoutUnit logicalTopVisualOverflow = std::min(textBox->pixelSnappedLogicalTop() + childOverflowLogicalTop, logicalVisualOverflow.y());
    LayoutUnit logicalBottomVisualOverflow = std::max(textBox->pixelSnappedLogicalBottom() + childOverflowLogicalBottom, logicalVisualOverflow.maxY());
    LayoutUnit logicalLeftVisualOverflow = std::min(textBox->pixelSnappedLogicalLeft() + childOverflowLogicalLeft, logicalVisualOverflow.x());
    LayoutUnit logicalRightVisualOverflow = std::max(textBox->pixelSnappedLogicalRight() + childOverflowLogicalRight, logicalVisualOverflow.maxX());

    logicalVisualOverflow = LayoutRect(logicalLeftVisualOverflow, logicalTopVisualOverflow,
                                       logicalRightVisualOverflow - logicalLeftVisualOverflow, logicalBottomVisualOverflow - logicalTopVisualOverflow);

    textBox->setLogicalOverflowRect(logicalVisualOverflow);
}

inline void InlineFlowBox::addReplacedChildOverflow(const InlineBox* inlineBox, LayoutRect& logicalLayoutOverflow, LayoutRect& logicalVisualOverflow)
{
    RenderBox& box = toRenderBox(inlineBox->renderer());

    // Visual overflow only propagates if the box doesn't have a self-painting layer.  This rectangle does not include
    // transforms or relative positioning (since those objects always have self-painting layers), but it does need to be adjusted
    // for writing-mode differences.
    if (!box.hasSelfPaintingLayer()) {
        LayoutRect childLogicalVisualOverflow = box.visualOverflowRect();
        childLogicalVisualOverflow.move(inlineBox->logicalLeft(), inlineBox->logicalTop());
        logicalVisualOverflow.unite(childLogicalVisualOverflow);
    }

    // Layout overflow internal to the child box only propagates if the child box doesn't have overflow clip set.
    // Otherwise the child border box propagates as layout overflow.  This rectangle must include transforms and relative positioning
    // and be adjusted for writing-mode differences.
    LayoutRect childLogicalLayoutOverflow = box.layoutOverflowRectForPropagation();
    childLogicalLayoutOverflow.move(inlineBox->logicalLeft(), inlineBox->logicalTop());
    logicalLayoutOverflow.unite(childLogicalLayoutOverflow);
}

void InlineFlowBox::computeOverflow(LayoutUnit lineTop, LayoutUnit lineBottom, GlyphOverflowAndFallbackFontsMap& textBoxDataMap)
{
    // If we know we have no overflow, we can just bail.
    if (knownToHaveNoOverflow()) {
        ASSERT(!m_overflow);
        return;
    }

    if (m_overflow)
        m_overflow.clear();

    // Visual overflow just includes overflow for stuff we need to issues paint invalidations for ourselves. Self-painting layers are ignored.
    // Layout overflow is used to determine scrolling extent, so it still includes child layers and also factors in
    // transforms, relative positioning, etc.
    LayoutRect logicalLayoutOverflow(enclosingLayoutRect(logicalFrameRectIncludingLineHeight(lineTop, lineBottom)));
    LayoutRect logicalVisualOverflow(logicalLayoutOverflow);

    addBoxShadowVisualOverflow(logicalVisualOverflow);
    addBorderOutsetVisualOverflow(logicalVisualOverflow);
    addOutlineVisualOverflow(logicalVisualOverflow);

    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.

        if (curr->renderer().isText()) {
            InlineTextBox* text = toInlineTextBox(curr);
            LayoutRect textBoxOverflow(enclosingLayoutRect(text->logicalFrameRect()));
            addTextBoxVisualOverflow(text, textBoxDataMap, textBoxOverflow);
            logicalVisualOverflow.unite(textBoxOverflow);
        } else if (curr->renderer().isRenderInline()) {
            InlineFlowBox* flow = toInlineFlowBox(curr);
            flow->computeOverflow(lineTop, lineBottom, textBoxDataMap);
            if (!hasSelfPaintingLayer(flow))
                logicalVisualOverflow.unite(flow->logicalVisualOverflowRect(lineTop, lineBottom));
            LayoutRect childLayoutOverflow = flow->logicalLayoutOverflowRect(lineTop, lineBottom);
            childLayoutOverflow.move(flow->boxModelObject()->relativePositionLogicalOffset());
            logicalLayoutOverflow.unite(childLayoutOverflow);
        } else {
            addReplacedChildOverflow(curr, logicalLayoutOverflow, logicalVisualOverflow);
        }
    }

    setOverflowFromLogicalRects(logicalLayoutOverflow, logicalVisualOverflow, lineTop, lineBottom);
}

void InlineFlowBox::setLayoutOverflow(const LayoutRect& rect, const LayoutRect& frameBox)
{
    if (frameBox.contains(rect) || rect.isEmpty())
        return;

    if (!m_overflow)
        m_overflow = adoptPtr(new RenderOverflow(frameBox, frameBox));

    m_overflow->setLayoutOverflow(rect);
}

void InlineFlowBox::setVisualOverflow(const LayoutRect& rect, const LayoutRect& frameBox)
{
    if (frameBox.contains(rect) || rect.isEmpty())
        return;

    if (!m_overflow)
        m_overflow = adoptPtr(new RenderOverflow(frameBox, frameBox));

    m_overflow->setVisualOverflow(rect);
}

void InlineFlowBox::setOverflowFromLogicalRects(const LayoutRect& logicalLayoutOverflow, const LayoutRect& logicalVisualOverflow, LayoutUnit lineTop, LayoutUnit lineBottom)
{
    LayoutRect frameBox = enclosingLayoutRect(frameRectIncludingLineHeight(lineTop, lineBottom));
    setLayoutOverflow(logicalLayoutOverflow, frameBox);
    setVisualOverflow(logicalVisualOverflow, frameBox);
}

bool InlineFlowBox::nodeAtPoint(const HitTestRequest& request, HitTestResult& result, const HitTestLocation& locationInContainer, const LayoutPoint& accumulatedOffset, LayoutUnit lineTop, LayoutUnit lineBottom)
{
    LayoutRect overflowRect(visualOverflowRect(lineTop, lineBottom));
    overflowRect.moveBy(accumulatedOffset);
    if (!locationInContainer.intersects(overflowRect))
        return false;

    // Check children first.
    // We need to account for culled inline parents of the hit-tested nodes, so that they may also get included in area-based hit-tests.
    RenderObject* culledParent = 0;
    for (InlineBox* curr = lastChild(); curr; curr = curr->prevOnLine()) {
        if (curr->renderer().isText() || !hasSelfPaintingLayer(curr)) {
            RenderObject* newParent = 0;
            // Culled parents are only relevant for area-based hit-tests, so ignore it in point-based ones.
            if (locationInContainer.isRectBasedTest()) {
                newParent = curr->renderer().parent();
                if (newParent == renderer())
                    newParent = 0;
            }
            // Check the culled parent after all its children have been checked, to do this we wait until
            // we are about to test an element with a different parent.
            if (newParent != culledParent) {
                if (!newParent || !newParent->isDescendantOf(culledParent)) {
                    while (culledParent && culledParent != renderer() && culledParent != newParent) {
                        if (culledParent->isRenderInline() && toRenderInline(culledParent)->hitTestCulledInline(request, result, locationInContainer, accumulatedOffset))
                            return true;
                        culledParent = culledParent->parent();
                    }
                }
                culledParent = newParent;
            }
            if (curr->nodeAtPoint(request, result, locationInContainer, accumulatedOffset, lineTop, lineBottom)) {
                renderer().updateHitTestResult(result, locationInContainer.point() - toLayoutSize(accumulatedOffset));
                return true;
            }
        }
    }
    // Check any culled ancestor of the final children tested.
    while (culledParent && culledParent != renderer()) {
        if (culledParent->isRenderInline() && toRenderInline(culledParent)->hitTestCulledInline(request, result, locationInContainer, accumulatedOffset))
            return true;
        culledParent = culledParent->parent();
    }

    // Now check ourselves. Pixel snap hit testing.
    // Move x/y to our coordinates.
    LayoutRect rect(roundedFrameRect());
    rect.moveBy(accumulatedOffset);

    if (visibleToHitTestRequest(request) && locationInContainer.intersects(rect)) {
        renderer().updateHitTestResult(result, locationInContainer.point() - toLayoutSize(accumulatedOffset)); // Don't add in m_x or m_y here, we want coords in the containing block's space.
        if (!result.addNodeToRectBasedTestResult(renderer().node(), request, locationInContainer, rect))
            return true;
    }

    return false;
}

void InlineFlowBox::paint(PaintInfo& paintInfo, const LayoutPoint& paintOffset, LayoutUnit lineTop, LayoutUnit lineBottom, Vector<RenderBox*>& layers)
{
    LayoutRect overflowRect(visualOverflowRect(lineTop, lineBottom));
    overflowRect.moveBy(paintOffset);

    if (!paintInfo.rect.intersects(pixelSnappedIntRect(overflowRect)))
        return;

    paintBoxDecorationBackground(paintInfo, paintOffset);

    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isText() || !hasSelfPaintingLayer(curr))
            curr->paint(paintInfo, paintOffset, lineTop, lineBottom, layers);
    }
}

void InlineFlowBox::paintFillLayers(const PaintInfo& paintInfo, const Color& c, const FillLayer& fillLayer, const LayoutRect& rect)
{
    if (fillLayer.next())
        paintFillLayers(paintInfo, c, *fillLayer.next(), rect);
    paintFillLayer(paintInfo, c, fillLayer, rect);
}

bool InlineFlowBox::boxShadowCanBeAppliedToBackground(const FillLayer& lastBackgroundLayer) const
{
    // The checks here match how paintFillLayer() decides whether to clip (if it does, the shadow
    // would be clipped out, so it has to be drawn separately).
    StyleImage* image = lastBackgroundLayer.image();
    bool hasFillImage = image && image->canRender(renderer());
    return (!hasFillImage && !renderer().style()->hasBorderRadius()) || (!prevLineBox() && !nextLineBox()) || !parent();
}

void InlineFlowBox::paintFillLayer(const PaintInfo& paintInfo, const Color& c, const FillLayer& fillLayer, const LayoutRect& rect)
{
    StyleImage* img = fillLayer.image();
    bool hasFillImage = img && img->canRender(renderer());
    if ((!hasFillImage && !renderer().style()->hasBorderRadius()) || (!prevLineBox() && !nextLineBox()) || !parent()) {
        boxModelObject()->paintFillLayerExtended(paintInfo, c, fillLayer, rect, BackgroundBleedNone, this, rect.size());
    } else if (renderer().style()->boxDecorationBreak() == DCLONE) {
        GraphicsContextStateSaver stateSaver(*paintInfo.context);
        paintInfo.context->clip(LayoutRect(rect.x(), rect.y(), width(), height()));
        boxModelObject()->paintFillLayerExtended(paintInfo, c, fillLayer, rect, BackgroundBleedNone, this, rect.size());
    } else {
        // We have a fill image that spans multiple lines.
        // We need to adjust tx and ty by the width of all previous lines.
        // Think of background painting on inlines as though you had one long line, a single continuous
        // strip.  Even though that strip has been broken up across multiple lines, you still paint it
        // as though you had one single line.  This means each line has to pick up the background where
        // the previous line left off.
        LayoutUnit logicalOffsetOnLine = 0;
        LayoutUnit totalLogicalWidth;
        if (renderer().style()->direction() == LTR) {
            for (InlineFlowBox* curr = prevLineBox(); curr; curr = curr->prevLineBox())
                logicalOffsetOnLine += curr->logicalWidth();
            totalLogicalWidth = logicalOffsetOnLine;
            for (InlineFlowBox* curr = this; curr; curr = curr->nextLineBox())
                totalLogicalWidth += curr->logicalWidth();
        } else {
            for (InlineFlowBox* curr = nextLineBox(); curr; curr = curr->nextLineBox())
                logicalOffsetOnLine += curr->logicalWidth();
            totalLogicalWidth = logicalOffsetOnLine;
            for (InlineFlowBox* curr = this; curr; curr = curr->prevLineBox())
                totalLogicalWidth += curr->logicalWidth();
        }
        LayoutUnit stripX = rect.x() - logicalOffsetOnLine;
        LayoutUnit stripY = rect.y();
        LayoutUnit stripWidth = totalLogicalWidth;
        LayoutUnit stripHeight = static_cast<LayoutUnit>(height());

        GraphicsContextStateSaver stateSaver(*paintInfo.context);
        paintInfo.context->clip(LayoutRect(rect.x(), rect.y(), width(), height()));
        boxModelObject()->paintFillLayerExtended(paintInfo, c, fillLayer, LayoutRect(stripX, stripY, stripWidth, stripHeight), BackgroundBleedNone, this, rect.size());
    }
}

void InlineFlowBox::paintBoxShadow(const PaintInfo& info, RenderStyle* s, ShadowStyle shadowStyle, const LayoutRect& paintRect)
{
    if ((!prevLineBox() && !nextLineBox()) || !parent())
        boxModelObject()->paintBoxShadow(info, paintRect, s, shadowStyle);
    else {
        // FIXME: We can do better here in the multi-line case. We want to push a clip so that the shadow doesn't
        // protrude incorrectly at the edges, and we want to possibly include shadows cast from the previous/following lines
        boxModelObject()->paintBoxShadow(info, paintRect, s, shadowStyle, includeLogicalLeftEdge(), includeLogicalRightEdge());
    }
}

static LayoutRect clipRectForNinePieceImageStrip(InlineFlowBox* box, const NinePieceImage& image, const LayoutRect& paintRect)
{
    LayoutRect clipRect(paintRect);
    RenderStyle* style = box->renderer().style();
    LayoutBoxExtent outsets = style->imageOutsets(image);
    clipRect.setY(paintRect.y() - outsets.top());
    clipRect.setHeight(paintRect.height() + outsets.top() + outsets.bottom());
    if (box->includeLogicalLeftEdge()) {
        clipRect.setX(paintRect.x() - outsets.left());
        clipRect.setWidth(paintRect.width() + outsets.left());
    }
    if (box->includeLogicalRightEdge())
        clipRect.setWidth(clipRect.width() + outsets.right());
    return clipRect;
}

void InlineFlowBox::paintBoxDecorationBackground(PaintInfo& paintInfo, const LayoutPoint& paintOffset)
{
    // You can use p::first-line to specify a background. If so, the root line boxes for
    // a line may actually have to paint a background.
    RenderStyle* styleToUse = renderer().style(isFirstLineStyle());
    bool shouldPaintBoxDecorationBackground;
    if (parent())
        shouldPaintBoxDecorationBackground = renderer().hasBoxDecorationBackground();
    else
        shouldPaintBoxDecorationBackground = isFirstLineStyle() && styleToUse != renderer().style();

    if (!shouldPaintBoxDecorationBackground)
        return;

    // Pixel snap background/border painting.
    LayoutRect frameRect = roundedFrameRect();

    // Move x/y to our coordinates.
    LayoutRect localRect(frameRect);
    LayoutPoint adjustedPaintOffset = paintOffset + localRect.location();

    LayoutRect paintRect = LayoutRect(adjustedPaintOffset, frameRect.size());

    // Shadow comes first and is behind the background and border.
    if (!boxModelObject()->boxShadowShouldBeAppliedToBackground(BackgroundBleedNone, this))
        paintBoxShadow(paintInfo, styleToUse, Normal, paintRect);

    Color backgroundColor = renderer().resolveColor(styleToUse, CSSPropertyBackgroundColor);
    paintFillLayers(paintInfo, backgroundColor, styleToUse->backgroundLayers(), paintRect);
    paintBoxShadow(paintInfo, styleToUse, Inset, paintRect);

    // :first-line cannot be used to put borders on a line. Always paint borders with our
    // non-first-line style.
    if (parent() && renderer().style()->hasBorder()) {
        const NinePieceImage& borderImage = renderer().style()->borderImage();
        StyleImage* borderImageSource = borderImage.image();
        bool hasBorderImage = borderImageSource && borderImageSource->canRender(renderer());
        if (hasBorderImage && !borderImageSource->isLoaded())
            return; // Don't paint anything while we wait for the image to load.

        // The simple case is where we either have no border image or we are the only box for this object.
        // In those cases only a single call to draw is required.
        if (!hasBorderImage || (!prevLineBox() && !nextLineBox())) {
            boxModelObject()->paintBorder(paintInfo, paintRect, renderer().style(isFirstLineStyle()), BackgroundBleedNone, includeLogicalLeftEdge(), includeLogicalRightEdge());
        } else {
            // We have a border image that spans multiple lines.
            // We need to adjust tx and ty by the width of all previous lines.
            // Think of border image painting on inlines as though you had one long line, a single continuous
            // strip. Even though that strip has been broken up across multiple lines, you still paint it
            // as though you had one single line. This means each line has to pick up the image where
            // the previous line left off.
            // FIXME: What the heck do we do with RTL here? The math we're using is obviously not right,
            // but it isn't even clear how this should work at all.
            LayoutUnit logicalOffsetOnLine = 0;
            for (InlineFlowBox* curr = prevLineBox(); curr; curr = curr->prevLineBox())
                logicalOffsetOnLine += curr->logicalWidth();
            LayoutUnit totalLogicalWidth = logicalOffsetOnLine;
            for (InlineFlowBox* curr = this; curr; curr = curr->nextLineBox())
                totalLogicalWidth += curr->logicalWidth();
            LayoutUnit stripX = adjustedPaintOffset.x() - logicalOffsetOnLine;
            LayoutUnit stripY = adjustedPaintOffset.y();
            LayoutUnit stripWidth = totalLogicalWidth;
            LayoutUnit stripHeight = frameRect.height();

            LayoutRect clipRect = clipRectForNinePieceImageStrip(this, borderImage, paintRect);
            GraphicsContextStateSaver stateSaver(*paintInfo.context);
            paintInfo.context->clip(clipRect);
            boxModelObject()->paintBorder(paintInfo, LayoutRect(stripX, stripY, stripWidth, stripHeight), renderer().style(isFirstLineStyle()));
        }
    }
}

InlineBox* InlineFlowBox::firstLeafChild() const
{
    InlineBox* leaf = 0;
    for (InlineBox* child = firstChild(); child && !leaf; child = child->nextOnLine())
        leaf = child->isLeaf() ? child : toInlineFlowBox(child)->firstLeafChild();
    return leaf;
}

InlineBox* InlineFlowBox::lastLeafChild() const
{
    InlineBox* leaf = 0;
    for (InlineBox* child = lastChild(); child && !leaf; child = child->prevOnLine())
        leaf = child->isLeaf() ? child : toInlineFlowBox(child)->lastLeafChild();
    return leaf;
}

RenderObject::SelectionState InlineFlowBox::selectionState()
{
    return RenderObject::SelectionNone;
}

bool InlineFlowBox::canAccommodateEllipsis(bool ltr, int blockEdge, int ellipsisWidth) const
{
    for (InlineBox *box = firstChild(); box; box = box->nextOnLine()) {
        if (!box->canAccommodateEllipsis(ltr, blockEdge, ellipsisWidth))
            return false;
    }
    return true;
}

float InlineFlowBox::placeEllipsisBox(bool ltr, float blockLeftEdge, float blockRightEdge, float ellipsisWidth, float &truncatedWidth, bool& foundBox)
{
    float result = -1;
    // We iterate over all children, the foundBox variable tells us when we've found the
    // box containing the ellipsis.  All boxes after that one in the flow are hidden.
    // If our flow is ltr then iterate over the boxes from left to right, otherwise iterate
    // from right to left. Varying the order allows us to correctly hide the boxes following the ellipsis.
    InlineBox* box = ltr ? firstChild() : lastChild();

    // NOTE: these will cross after foundBox = true.
    int visibleLeftEdge = blockLeftEdge;
    int visibleRightEdge = blockRightEdge;

    while (box) {
        int currResult = box->placeEllipsisBox(ltr, visibleLeftEdge, visibleRightEdge, ellipsisWidth, truncatedWidth, foundBox);
        if (currResult != -1 && result == -1)
            result = currResult;

        if (ltr) {
            visibleLeftEdge += box->logicalWidth();
            box = box->nextOnLine();
        }
        else {
            visibleRightEdge -= box->logicalWidth();
            box = box->prevOnLine();
        }
    }
    return result;
}

void InlineFlowBox::clearTruncation()
{
    for (InlineBox *box = firstChild(); box; box = box->nextOnLine())
        box->clearTruncation();
}

LayoutUnit InlineFlowBox::computeOverAnnotationAdjustment(LayoutUnit allowedPosition) const
{
    LayoutUnit result = 0;
    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.

        if (curr->isInlineFlowBox())
            result = std::max(result, toInlineFlowBox(curr)->computeOverAnnotationAdjustment(allowedPosition));

        if (curr->isInlineTextBox()) {
            RenderStyle* style = curr->renderer().style(isFirstLineStyle());
            TextEmphasisPosition emphasisMarkPosition;
            if (style->textEmphasisMark() != TextEmphasisMarkNone && toInlineTextBox(curr)->getEmphasisMarkPosition(style, emphasisMarkPosition) && emphasisMarkPosition == TextEmphasisPositionOver) {
                int topOfEmphasisMark = curr->logicalTop() - style->font().emphasisMarkHeight(style->textEmphasisMarkString());
                result = std::max(result, allowedPosition - topOfEmphasisMark);
            }
        }
    }
    return result;
}

LayoutUnit InlineFlowBox::computeUnderAnnotationAdjustment(LayoutUnit allowedPosition) const
{
    LayoutUnit result = 0;
    for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) {
        if (curr->renderer().isOutOfFlowPositioned())
            continue; // Positioned placeholders don't affect calculations.

        if (curr->isInlineFlowBox())
            result = std::max(result, toInlineFlowBox(curr)->computeUnderAnnotationAdjustment(allowedPosition));

        if (curr->isInlineTextBox()) {
            RenderStyle* style = curr->renderer().style(isFirstLineStyle());
            if (style->textEmphasisMark() != TextEmphasisMarkNone && style->textEmphasisPosition() == TextEmphasisPositionUnder) {
                LayoutUnit bottomOfEmphasisMark = curr->logicalBottom() + style->font().emphasisMarkHeight(style->textEmphasisMarkString());
                result = std::max(result, bottomOfEmphasisMark - allowedPosition);
            }
        }
    }
    return result;
}

void InlineFlowBox::collectLeafBoxesInLogicalOrder(Vector<InlineBox*>& leafBoxesInLogicalOrder, CustomInlineBoxRangeReverse customReverseImplementation, void* userData) const
{
    InlineBox* leaf = firstLeafChild();

    // FIXME: The reordering code is a copy of parts from BidiResolver::createBidiRunsForLine, operating directly on InlineBoxes, instead of BidiRuns.
    // Investigate on how this code could possibly be shared.
    unsigned char minLevel = 128;
    unsigned char maxLevel = 0;

    // First find highest and lowest levels, and initialize leafBoxesInLogicalOrder with the leaf boxes in visual order.
    for (; leaf; leaf = leaf->nextLeafChild()) {
        minLevel = std::min(minLevel, leaf->bidiLevel());
        maxLevel = std::max(maxLevel, leaf->bidiLevel());
        leafBoxesInLogicalOrder.append(leaf);
    }

    if (renderer().style()->rtlOrdering() == VisualOrder)
        return;

    // Reverse of reordering of the line (L2 according to Bidi spec):
    // L2. From the highest level found in the text to the lowest odd level on each line,
    // reverse any contiguous sequence of characters that are at that level or higher.

    // Reversing the reordering of the line is only done up to the lowest odd level.
    if (!(minLevel % 2))
        ++minLevel;

    Vector<InlineBox*>::iterator end = leafBoxesInLogicalOrder.end();
    while (minLevel <= maxLevel) {
        Vector<InlineBox*>::iterator it = leafBoxesInLogicalOrder.begin();
        while (it != end) {
            while (it != end) {
                if ((*it)->bidiLevel() >= minLevel)
                    break;
                ++it;
            }
            Vector<InlineBox*>::iterator first = it;
            while (it != end) {
                if ((*it)->bidiLevel() < minLevel)
                    break;
                ++it;
            }
            Vector<InlineBox*>::iterator last = it;
            if (customReverseImplementation) {
                ASSERT(userData);
                (*customReverseImplementation)(userData, first, last);
            } else
                std::reverse(first, last);
        }
        ++minLevel;
    }
}

#ifndef NDEBUG

const char* InlineFlowBox::boxName() const
{
    return "InlineFlowBox";
}

void InlineFlowBox::showLineTreeAndMark(const InlineBox* markedBox1, const char* markedLabel1, const InlineBox* markedBox2, const char* markedLabel2, const RenderObject* obj, int depth) const
{
    InlineBox::showLineTreeAndMark(markedBox1, markedLabel1, markedBox2, markedLabel2, obj, depth);
    for (const InlineBox* box = firstChild(); box; box = box->nextOnLine())
        box->showLineTreeAndMark(markedBox1, markedLabel1, markedBox2, markedLabel2, obj, depth + 1);
}

#endif

#if ENABLE(ASSERT)
void InlineFlowBox::checkConsistency() const
{
#ifdef CHECK_CONSISTENCY
    ASSERT(!m_hasBadChildList);
    const InlineBox* prev = 0;
    for (const InlineBox* child = m_firstChild; child; child = child->nextOnLine()) {
        ASSERT(child->parent() == this);
        ASSERT(child->prevOnLine() == prev);
        prev = child;
    }
    ASSERT(prev == m_lastChild);
#endif
}

#endif

} // namespace blink