// Copyright (c) 2012 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include "net/quic/congestion_control/cubic.h"

#include <algorithm>

#include "base/basictypes.h"
#include "base/logging.h"
#include "base/time/time.h"
#include "net/quic/congestion_control/cube_root.h"
#include "net/quic/quic_protocol.h"

using std::max;

namespace net {

namespace {

// Constants based on TCP defaults.
// The following constants are in 2^10 fractions of a second instead of ms to
// allow a 10 shift right to divide.
const int kCubeScale = 40;  // 1024*1024^3 (first 1024 is from 0.100^3)
                            // where 0.100 is 100 ms which is the scaling
                            // round trip time.
const int kCubeCongestionWindowScale = 410;
const uint64 kCubeFactor = (GG_UINT64_C(1) << kCubeScale) /
    kCubeCongestionWindowScale;

const uint32 kDefaultNumConnections = 2;
const float kBeta = 0.7f;  // Default Cubic backoff factor.
// Additional backoff factor when loss occurs in the concave part of the Cubic
// curve. This additional backoff factor is expected to give up bandwidth to
// new concurrent flows and speed up convergence.
const float kBetaLastMax = 0.85f;

}  // namespace

Cubic::Cubic(const QuicClock* clock, QuicConnectionStats* stats)
    : clock_(clock),
      num_connections_(kDefaultNumConnections),
      epoch_(QuicTime::Zero()),
      last_update_time_(QuicTime::Zero()),
      stats_(stats) {
  Reset();
}

void Cubic::SetNumConnections(int num_connections) {
  num_connections_ = num_connections;
}

float Cubic::Alpha() const {
  // TCPFriendly alpha is described in Section 3.3 of the CUBIC paper. Note that
  // beta here is a cwnd multiplier, and is equal to 1-beta from the paper.
  // We derive the equivalent alpha for an N-connection emulation as:
  const float beta = Beta();
  return 3 * num_connections_ * num_connections_ * (1 - beta) / (1 + beta);
}

float Cubic::Beta() const {
  // kNConnectionBeta is the backoff factor after loss for our N-connection
  // emulation, which emulates the effective backoff of an ensemble of N
  // TCP-Reno connections on a single loss event. The effective multiplier is
  // computed as:
  return (num_connections_ - 1 + kBeta) / num_connections_;
}

void Cubic::Reset() {
  epoch_ = QuicTime::Zero();  // Reset time.
  last_update_time_ = QuicTime::Zero();  // Reset time.
  last_congestion_window_ = 0;
  last_max_congestion_window_ = 0;
  acked_packets_count_ = 0;
  estimated_tcp_congestion_window_ = 0;
  origin_point_congestion_window_ = 0;
  time_to_origin_point_ = 0;
  last_target_congestion_window_ = 0;
}

void Cubic::UpdateCongestionControlStats(QuicPacketCount new_cubic_mode_cwnd,
                                         QuicPacketCount new_reno_mode_cwnd) {

  QuicPacketCount highest_new_cwnd = max(new_cubic_mode_cwnd,
                                         new_reno_mode_cwnd);
  if (last_congestion_window_ < highest_new_cwnd) {
    // cwnd will increase to highest_new_cwnd.
    stats_->cwnd_increase_congestion_avoidance +=
        highest_new_cwnd - last_congestion_window_;
    if (new_cubic_mode_cwnd > new_reno_mode_cwnd) {
      // This cwnd increase is due to cubic mode.
      stats_->cwnd_increase_cubic_mode +=
          new_cubic_mode_cwnd - last_congestion_window_;
    }
  }
}

QuicPacketCount Cubic::CongestionWindowAfterPacketLoss(
    QuicPacketCount current_congestion_window) {
  if (current_congestion_window < last_max_congestion_window_) {
    // We never reached the old max, so assume we are competing with another
    // flow. Use our extra back off factor to allow the other flow to go up.
    last_max_congestion_window_ =
        static_cast<int>(kBetaLastMax * current_congestion_window);
  } else {
    last_max_congestion_window_ = current_congestion_window;
  }
  epoch_ = QuicTime::Zero();  // Reset time.
  return static_cast<int>(current_congestion_window * Beta());
}

QuicPacketCount Cubic::CongestionWindowAfterAck(
    QuicPacketCount current_congestion_window,
    QuicTime::Delta delay_min) {
  acked_packets_count_ += 1;  // Packets acked.
  QuicTime current_time = clock_->ApproximateNow();

  // Cubic is "independent" of RTT, the update is limited by the time elapsed.
  if (last_congestion_window_ == current_congestion_window &&
      (current_time.Subtract(last_update_time_) <= MaxCubicTimeInterval())) {
    return max(last_target_congestion_window_,
               estimated_tcp_congestion_window_);
  }
  last_congestion_window_ = current_congestion_window;
  last_update_time_ = current_time;

  if (!epoch_.IsInitialized()) {
    // First ACK after a loss event.
    DVLOG(1) << "Start of epoch";
    epoch_ = current_time;  // Start of epoch.
    acked_packets_count_ = 1;  // Reset count.
    // Reset estimated_tcp_congestion_window_ to be in sync with cubic.
    estimated_tcp_congestion_window_ = current_congestion_window;
    if (last_max_congestion_window_ <= current_congestion_window) {
      time_to_origin_point_ = 0;
      origin_point_congestion_window_ = current_congestion_window;
    } else {
      time_to_origin_point_ = CubeRoot::Root(kCubeFactor *
          (last_max_congestion_window_ - current_congestion_window));
      origin_point_congestion_window_ =
          last_max_congestion_window_;
    }
  }
  // Change the time unit from microseconds to 2^10 fractions per second. Take
  // the round trip time in account. This is done to allow us to use shift as a
  // divide operator.
  int64 elapsed_time =
      (current_time.Add(delay_min).Subtract(epoch_).ToMicroseconds() << 10) /
      base::Time::kMicrosecondsPerSecond;

  int64 offset = time_to_origin_point_ - elapsed_time;
  QuicPacketCount delta_congestion_window = (kCubeCongestionWindowScale
      * offset * offset * offset) >> kCubeScale;

  QuicPacketCount target_congestion_window =
      origin_point_congestion_window_ - delta_congestion_window;

  DCHECK_LT(0u, estimated_tcp_congestion_window_);
  // With dynamic beta/alpha based on number of active streams, it is possible
  // for the required_ack_count to become much lower than acked_packets_count_
  // suddenly, leading to more than one iteration through the following loop.
  while (true) {
    // Update estimated TCP congestion_window.
    uint32 required_ack_count =
        estimated_tcp_congestion_window_ / Alpha();
    if (acked_packets_count_ < required_ack_count) {
      break;
    }
    acked_packets_count_ -= required_ack_count;
    estimated_tcp_congestion_window_++;
  }

  // Update cubic mode and reno mode stats in QuicConnectionStats.
  UpdateCongestionControlStats(target_congestion_window,
                               estimated_tcp_congestion_window_);

  // We have a new cubic congestion window.
  last_target_congestion_window_ = target_congestion_window;

  // Compute target congestion_window based on cubic target and estimated TCP
  // congestion_window, use highest (fastest).
  if (target_congestion_window < estimated_tcp_congestion_window_) {
    target_congestion_window = estimated_tcp_congestion_window_;
  }

  DVLOG(1) << "Target congestion_window: " << target_congestion_window;
  return target_congestion_window;
}

}  // namespace net