**TODO(vtl)**: Reorganize this to be properly structured.

# Mojom IDL

The Mojom IDL (interface definition language) is primarily used to describe
*interfaces* to be used on [message pipes](message_pipes.md). Below, we describe
practical aspects of the Mojom language. Elsewhere, we describe the [Mojom
protocol](mojom_protocol.md). (**TODO(vtl)**: Also, serialization format?
Versioning?)

Text files written in Mojom IDL are given the `.mojom` extension by convention
(and are usually referred to as Mojom/mojom/`.mojom` files). The Mojom bindings
generator (**TODO(vtl)**: link?) may be used to generate code in a variety of
languages (including C++, Dart, and Go) from a Mojom file. Such generated code
"implements" the things specified in the Mojom file, in a way that's appropriate
for the particular target language.

## Interfaces

A Mojom *interface* is (typically) used to describe communication on a message
pipe. Typically, message pipes are created with a particular interface in mind,
with one endpoint designated the *client* (which sends *request* messages and
receives *response* messages) and the other designed that *server* or *impl*
(which receives request messages and sends response messages).

For example, take the following Mojom interface declaration:
```mojom
interface MyInterface {
  Foo(int32 a, string b);
  Bar() => (bool x, uint32 y);
  Baz() => ();
};
```
This specifies a Mojom interface in which the client may send three types of
messages, namely `Foo`, `Bar`, and `Baz` (see the note below about names in
Mojom). The first does not have a response message defined, whereas the latter
two do. Whenever the server receives a `Bar` or `Baz` message, it *must*
(eventually) send a (single) corresponding response message.

The `Foo` request message contains two pieces of data: a signed (two's
complement) 32-bit integer called `a` and a Unicode string called `b`. On the
"wire", the message basically consists of metadata and a (serialized) *struct*
(see below) containing `a` and `b`.

The `Bar` request message contains no data, so on the wire it's just metadata
and an empty struct. It has a response message, containing a boolean value `x`
and an unsigned 32-bit integer `y`, which on the wire consists of metadata and a
struct with `x` and `y`. Each time the server receives a `Bar` message, it is
supposed to (eventually) respond by sending the response message. (Note: The
client may include as part of the request message's metadata an identifier for
the request; the response's metadata will then include this identifier, allowing
it to match responses to requests.)

The `Baz` request message also contains no data. It requires a response, also
containing no data. Note that even though the response has no data, a response
message must nonetheless be sent, functioning as an "ack". (Thus this is
different from not having a response, as was the case for `Foo`.)

## Structs

Mojom defines a way of serializing data structures (with the Mojom IDL providing
a way of specifying those data structures). A Mojom *struct* is the basic unit
of serialization. As we saw above, messages are basically just structs, with a
small amount of additional metadata.

Here is a simple example of a struct declaration:
```mojom
struct MyStruct {
  int32 a;
  string b;
};
```
We will discuss in greater detail how structs are declared later.

### Names in Mojom

Names in Mojom are not important. Except in affecting compatibility at the level
of source code (when generating bindings), names in a Mojom file may be changed
arbitrarily without any effect on the "meaning" of the Mojom file (subject to
basic language requirements, e.g., avoiding collisions with keywords and other
names). E.g., the following is completely equivalent to the interface discussed
above:
```mojom
interface Something {
  One(int32 an_integer, string a_string);
  Two() => (bool a_boolean, uint32 an_unsigned);
  Three() => ();
};
```
The `Something` interface is compatible at a binary level with `MyInterface`. A
client using the `Something` interface may communicate with a server
implementing the `MyInterface` with no issues, and vice versa.

The reason for this is that elements (messages, parameters, struct members,
etc.) are actually identified by *ordinal* value. They may be specified
explicitly (using `@123` notation; see below). If they are not specified
explicitly, they are automatically assigned. (The ordinal values for each
interface/struct/etc. must assign distinct values for each item, in a
consecutive range starting at 0.)

Explicitly assigning ordinals allows Mojom files to be rearranged "physically"
without changing their meaning. E.g., perhaps one would write:
```mojom
interface MyInterface {
  Bar@1() => (bool x@0, uint32 y@1);
  Baz@2() => ();

  // Please don't use this in new code!
  FooDeprecated@0(int32 a@0, string b@1);
};
```

Ordinals also tie into the versioning scheme (**TODO(vtl)**: link?), which
allows Mojom files to be evolved in a backwards-compatible way. We will not
discuss this matter further here.

**TODO(vtl)**: Maybe mention exceptions to this in attributes (e.g.,
`ServiceName`).

## Mojom files

A Mojom file consists of, in order:
* an optional *module* declaration;
* zero or more *import* statements (the order of these is not important); and
* zero or more declarations of *struct*s, *interface*s, *union*s, *enum*s, or
  *const*s (the order of these is not important).
(These are all described further below.)

Additionally, C/C++-style comments are supported (i.e., single-line comments
starting with `//` or multi-line comments of the form `/* ... */`).

As stated above, the order of struct/interface/union/enum/const declarations is
not important. This is required to allow "cyclic" structures to be defined.
Nonetheless, whenever possible, one should declare things before they are
"used". For example, the following is valid but not recommended:
```mojom
// NOT recommended.

const MyEnum kMyConst = kMyOtherConst;
const MyEnum kMyOtherConst = A_VALUE;

enum MyEnum {
  A_VALUE,
  ANOTHER_VALUE,
};
```

### Naming style

There is a standard style for naming things:
* `StudlyCaps` (a.k.a. `CapitalizedCamelCase`) for: (struct, interface, union,
  and enum) type names and message (a.k.a. function or method) names;
* `unix_hacker_style` for field names (in structs and unions) and "parameter"
  names;
* `ALL_CAPS_UNIX_HACKER_STYLE` for enum value names; and
* `kStudlyCaps` for const names.

Following this style is highly recommended, since code generators for various
languages will expect this style, in order to transform the names into a more
language-appropriate style.

### Module statement

The Mojom *module* statement is just a way of logically grouping Mojom
declarations. For example:
```mojom
module my_module;
```
Mojom modules are similar to C++ namespaces (and the standard C++ code generator
would put generated code into the `my_module` namespace), in that there is no
implication that the file contains the entirety of the "module" definiton;
multiple files may have the same module statement. (There is also no requirement
that the module name have anything to do with the file path containing the Mojom
file.)

Mojom module names are hierarchical in that they can be composed of multiple
parts separated by `.`. For example:
```mojom
module my_module.my_submodule;

struct MyStruct {
};
```
Name look-up is similar to C++: E.g., if the current module is
`my_module.my_submodule` then `MyStruct`, `my_submodule.MyStruct`, and
`my_module.my_submodule.MyStruct` all refer to the above struct, whereas if the
current module is just `my_module` then only the latter two do.

### Import declarations

An *import* declaration makes the declarations from another Mojom file available
in the current Mojom file. Moreover, it operates transitively, in the sense that
it also makes the imports of the imported file available, etc. The "argument" to
the import statement is a path to a file. Tools that work with Mojom files are
typically provided with a search path for importing files (just as a C++
compiler can be provided with an "include path"), for the purposes of resolving
these paths. (**TODO(vtl)**: This always includes the current Mojom file's path,
right? Is the current path the first path that's searched?)

For example:
```mojom
module my_module;

import "path/to/another.mojom";
import "path/to/yet/a/different.mojom";
```
This makes the contents of the two mentioned Mojom files available, together
with whatever they import, transitively. (Note that names are resolved in the
way described in the previous section.)

Import cycles are not permitted (so, e.g., it would be an error if
`path/to/another.mojom` imported the current Mojom file). However, it is
entirely valid for Mojom files to be imported (transitively) multiple times
(e.g., it is fine for `path/to/another.mojom` to also import
`path/to/yet/a/different.mojom`).

### Struct declarations

A Mojom *struct* declaration consists of a finite sequence of *field
declaration*, each of which consists of a *type*, a *name*, and optionally a
*default value* (if applicable for the given type). (If no default value is
declared, then the default is the default value for the field type, typically 0,
null, or similar.)

Additionally, a struct may contain enum and const declarations (**TODO(vtl)**:
why not struct/union/interface declarations?). While the order of the field
declarations (with respect to one another) is important, the ordering of the
enum/const declarations (with respect to both the field declarations and other
enum/const declarations) is not. (But as before, we recommend declaring things
before "use".)

Here is an example with these elements:
```mojom
struct Foo {
  const int8 kSomeConstant = 123;

  enum MyEnum {
    A_VALUE,
    ANOTHER_VALUE
  };

  int8 first_field = kSomeConstant;
  uint32 second_field = 123;
  MyEnum etc_etc = A_VALUE;
  float a;    // Default value is 0.
  string? b;  // Default value is null.
};
```
(Note that `kSomeConstant` may be referred to as `Foo.kSomeConstant` and,
similarly, `MyEnum` as `Foo.MyEnum`. This is required outside of the `Foo`
declaration.)

### Interface declarations

**TODO(vtl)**

### Union declarations

**TODO(vtl)**

### Enum declarations

**TODO(vtl)**

### Const declarations

**TODO(vtl)**

**TODO(vtl)**: Write/(re)organize the sections below.

## Data types

### Primitive types

#### Standard types

#### Enum types

### "Pointer" types

#### Nullability

#### Strings

#### Maps

#### Structs

#### Arrays

#### Unions

### Handle types

#### Raw handle types

#### Interface types

#### Interface request types

## Annotations

## Pipelining