| // Copyright (c) 2009 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "glyf.h" |
| |
| #include <algorithm> |
| #include <limits> |
| |
| #include "head.h" |
| #include "loca.h" |
| #include "maxp.h" |
| |
| // glyf - Glyph Data |
| // http://www.microsoft.com/typography/otspec/glyf.htm |
| |
| #define TABLE_NAME "glyf" |
| |
| namespace { |
| |
| bool ParseFlagsForSimpleGlyph(ots::OpenTypeFile *file, |
| ots::Buffer *table, |
| uint32_t gly_length, |
| uint32_t num_flags, |
| uint32_t *flags_count_logical, |
| uint32_t *flags_count_physical, |
| uint32_t *xy_coordinates_length) { |
| uint8_t flag = 0; |
| if (!table->ReadU8(&flag)) { |
| return OTS_FAILURE_MSG("Can't read flag"); |
| } |
| |
| uint32_t delta = 0; |
| if (flag & (1u << 1)) { // x-Short |
| ++delta; |
| } else if (!(flag & (1u << 4))) { |
| delta += 2; |
| } |
| |
| if (flag & (1u << 2)) { // y-Short |
| ++delta; |
| } else if (!(flag & (1u << 5))) { |
| delta += 2; |
| } |
| |
| if (flag & (1u << 3)) { // repeat |
| if (*flags_count_logical + 1 >= num_flags) { |
| return OTS_FAILURE_MSG("Count too high (%d + 1 >= %d)", *flags_count_logical, num_flags); |
| } |
| uint8_t repeat = 0; |
| if (!table->ReadU8(&repeat)) { |
| return OTS_FAILURE_MSG("Can't read repeat value"); |
| } |
| if (repeat == 0) { |
| return OTS_FAILURE_MSG("Zero repeat"); |
| } |
| delta += (delta * repeat); |
| |
| *flags_count_logical += repeat; |
| if (*flags_count_logical >= num_flags) { |
| return OTS_FAILURE_MSG("Count too high (%d >= %d)", *flags_count_logical, num_flags); |
| } |
| ++(*flags_count_physical); |
| } |
| |
| if ((flag & (1u << 6)) || (flag & (1u << 7))) { // reserved flags |
| return OTS_FAILURE_MSG("Bad flag value (%d)", flag); |
| } |
| |
| *xy_coordinates_length += delta; |
| if (gly_length < *xy_coordinates_length) { |
| return OTS_FAILURE_MSG("Glyph coordinates length too low (%d < %d)", gly_length, *xy_coordinates_length); |
| } |
| |
| return true; |
| } |
| |
| bool ParseSimpleGlyph(ots::OpenTypeFile *file, const uint8_t *data, |
| ots::Buffer *table, int16_t num_contours, |
| uint32_t gly_offset, uint32_t gly_length, |
| uint32_t *new_size) { |
| ots::OpenTypeGLYF *glyf = file->glyf; |
| |
| // read the end-points array |
| uint16_t num_flags = 0; |
| for (int i = 0; i < num_contours; ++i) { |
| uint16_t tmp_index = 0; |
| if (!table->ReadU16(&tmp_index)) { |
| return OTS_FAILURE_MSG("Can't read contour index %d", i); |
| } |
| if (tmp_index == 0xffffu) { |
| return OTS_FAILURE_MSG("Bad contour index %d", i); |
| } |
| // check if the indices are monotonically increasing |
| if (i && (tmp_index + 1 <= num_flags)) { |
| return OTS_FAILURE_MSG("Decreasing contour index %d + 1 <= %d", tmp_index, num_flags); |
| } |
| num_flags = tmp_index + 1; |
| } |
| |
| uint16_t bytecode_length = 0; |
| if (!table->ReadU16(&bytecode_length)) { |
| return OTS_FAILURE_MSG("Can't read bytecode length"); |
| } |
| if ((file->maxp->version_1) && |
| (file->maxp->max_size_glyf_instructions < bytecode_length)) { |
| return OTS_FAILURE_MSG("Bytecode length too high %d", bytecode_length); |
| } |
| |
| const uint32_t gly_header_length = 10 + num_contours * 2 + 2; |
| if (gly_length < (gly_header_length + bytecode_length)) { |
| return OTS_FAILURE_MSG("Glyph header length too high %d", gly_header_length); |
| } |
| |
| glyf->iov.push_back(std::make_pair( |
| data + gly_offset, |
| static_cast<size_t>(gly_header_length + bytecode_length))); |
| |
| if (!table->Skip(bytecode_length)) { |
| return OTS_FAILURE_MSG("Can't skip bytecode of length %d", bytecode_length); |
| } |
| |
| uint32_t flags_count_physical = 0; // on memory |
| uint32_t xy_coordinates_length = 0; |
| for (uint32_t flags_count_logical = 0; |
| flags_count_logical < num_flags; |
| ++flags_count_logical, ++flags_count_physical) { |
| if (!ParseFlagsForSimpleGlyph(file, |
| table, |
| gly_length, |
| num_flags, |
| &flags_count_logical, |
| &flags_count_physical, |
| &xy_coordinates_length)) { |
| return OTS_FAILURE_MSG("Failed to parse glyph flags %d", flags_count_logical); |
| } |
| } |
| |
| if (gly_length < (gly_header_length + bytecode_length + |
| flags_count_physical + xy_coordinates_length)) { |
| return OTS_FAILURE_MSG("Glyph too short %d", gly_length); |
| } |
| |
| if (gly_length - (gly_header_length + bytecode_length + |
| flags_count_physical + xy_coordinates_length) > 3) { |
| // We allow 0-3 bytes difference since gly_length is 4-bytes aligned, |
| // zero-padded length. |
| return OTS_FAILURE_MSG("Invalid glyph length %d", gly_length); |
| } |
| |
| glyf->iov.push_back(std::make_pair( |
| data + gly_offset + gly_header_length + bytecode_length, |
| static_cast<size_t>(flags_count_physical + xy_coordinates_length))); |
| |
| *new_size |
| = gly_header_length + flags_count_physical + xy_coordinates_length + bytecode_length; |
| |
| return true; |
| } |
| |
| } // namespace |
| |
| namespace ots { |
| |
| bool ots_glyf_parse(OpenTypeFile *file, const uint8_t *data, size_t length) { |
| Buffer table(data, length); |
| |
| if (!file->maxp || !file->loca || !file->head) { |
| return OTS_FAILURE_MSG("Missing maxp or loca or head table needed by glyf table"); |
| } |
| |
| OpenTypeGLYF *glyf = new OpenTypeGLYF; |
| file->glyf = glyf; |
| |
| const unsigned num_glyphs = file->maxp->num_glyphs; |
| std::vector<uint32_t> &offsets = file->loca->offsets; |
| |
| if (offsets.size() != num_glyphs + 1) { |
| return OTS_FAILURE_MSG("Invalide glyph offsets size %ld != %d", offsets.size(), num_glyphs + 1); |
| } |
| |
| std::vector<uint32_t> resulting_offsets(num_glyphs + 1); |
| uint32_t current_offset = 0; |
| |
| for (unsigned i = 0; i < num_glyphs; ++i) { |
| const unsigned gly_offset = offsets[i]; |
| // The LOCA parser checks that these values are monotonic |
| const unsigned gly_length = offsets[i + 1] - offsets[i]; |
| if (!gly_length) { |
| // this glyph has no outline (e.g. the space charactor) |
| resulting_offsets[i] = current_offset; |
| continue; |
| } |
| |
| if (gly_offset >= length) { |
| return OTS_FAILURE_MSG("Glyph %d offset %d too high %ld", i, gly_offset, length); |
| } |
| // Since these are unsigned types, the compiler is not allowed to assume |
| // that they never overflow. |
| if (gly_offset + gly_length < gly_offset) { |
| return OTS_FAILURE_MSG("Glyph %d length (%d < 0)!", i, gly_length); |
| } |
| if (gly_offset + gly_length > length) { |
| return OTS_FAILURE_MSG("Glyph %d length %d too high", i, gly_length); |
| } |
| |
| table.set_offset(gly_offset); |
| int16_t num_contours, xmin, ymin, xmax, ymax; |
| if (!table.ReadS16(&num_contours) || |
| !table.ReadS16(&xmin) || |
| !table.ReadS16(&ymin) || |
| !table.ReadS16(&xmax) || |
| !table.ReadS16(&ymax)) { |
| return OTS_FAILURE_MSG("Can't read glyph %d header", i); |
| } |
| |
| if (num_contours <= -2) { |
| // -2, -3, -4, ... are reserved for future use. |
| return OTS_FAILURE_MSG("Bad number of contours %d in glyph %d", num_contours, i); |
| } |
| |
| // workaround for fonts in http://www.princexml.com/fonts/ |
| if ((xmin == 32767) && |
| (xmax == -32767) && |
| (ymin == 32767) && |
| (ymax == -32767)) { |
| OTS_WARNING("bad xmin/xmax/ymin/ymax values"); |
| xmin = xmax = ymin = ymax = 0; |
| } |
| |
| if (xmin > xmax || ymin > ymax) { |
| return OTS_FAILURE_MSG("Bad bounding box values bl=(%d, %d), tr=(%d, %d) in glyph %d", xmin, ymin, xmax, ymax, i); |
| } |
| |
| unsigned new_size = 0; |
| if (num_contours >= 0) { |
| // this is a simple glyph and might contain bytecode |
| if (!ParseSimpleGlyph(file, data, &table, |
| num_contours, gly_offset, gly_length, &new_size)) { |
| return OTS_FAILURE_MSG("Failed to parse glyph %d", i); |
| } |
| } else { |
| // it's a composite glyph without any bytecode. Enqueue the whole thing |
| glyf->iov.push_back(std::make_pair(data + gly_offset, |
| static_cast<size_t>(gly_length))); |
| new_size = gly_length; |
| } |
| |
| resulting_offsets[i] = current_offset; |
| // glyphs must be four byte aligned |
| // TODO(yusukes): investigate whether this padding is really necessary. |
| // Which part of the spec requires this? |
| const unsigned padding = (4 - (new_size & 3)) % 4; |
| if (padding) { |
| glyf->iov.push_back(std::make_pair( |
| reinterpret_cast<const uint8_t*>("\x00\x00\x00\x00"), |
| static_cast<size_t>(padding))); |
| new_size += padding; |
| } |
| current_offset += new_size; |
| } |
| resulting_offsets[num_glyphs] = current_offset; |
| |
| const uint16_t max16 = std::numeric_limits<uint16_t>::max(); |
| if ((*std::max_element(resulting_offsets.begin(), |
| resulting_offsets.end()) >= (max16 * 2u)) && |
| (file->head->index_to_loc_format != 1)) { |
| OTS_WARNING("2-bytes indexing is not possible (due to the padding above)"); |
| file->head->index_to_loc_format = 1; |
| } |
| |
| file->loca->offsets = resulting_offsets; |
| return true; |
| } |
| |
| bool ots_glyf_should_serialise(OpenTypeFile *file) { |
| return file->glyf != NULL; |
| } |
| |
| bool ots_glyf_serialise(OTSStream *out, OpenTypeFile *file) { |
| const OpenTypeGLYF *glyf = file->glyf; |
| |
| for (unsigned i = 0; i < glyf->iov.size(); ++i) { |
| if (!out->Write(glyf->iov[i].first, glyf->iov[i].second)) { |
| return OTS_FAILURE_MSG("Falied to write glyph %d", i); |
| } |
| } |
| |
| return true; |
| } |
| |
| void ots_glyf_free(OpenTypeFile *file) { |
| delete file->glyf; |
| } |
| |
| } // namespace ots |
| |
| #undef TABLE_NAME |
